Nu-Flame SYNERGY ELLESSE, Инструкция по использованию, установке и обслуживанию, Страница: 6 / 34

6
e. Setting Temperature - Time in Centigrade-24Hour Clock or Fahrenheit-12Hour Clock.
.
Simultaneously Press the Off and the Down Arrow buttons until the display changes from Fahrenheit -12Hour Clock to
Celsius -24Hour Clock and visa versa.
f. Setting the Time.
The time of day will flash after either:
.
Installing the batteries or
.
Simultaneously pressing the Up Arrow and Down Arrow buttons.
.
Press the Up Arrow button to set the Hour.
.
Press the Down Arrow button to set the Minute.
.
Press Off or simply wait to return to the manual screen.
IMPORTANT : For the following modes of controlling the fire automatically for Temperature or Timer Programs the Fire Must
be left in the Standby Setting (Pilot Lit) and left on the chosen Setting, with the Screen showing either Temp or Timer.
g. Setting the Day Time Temperature.
.
Briefly Press the Set Button to scroll to TEMP (Sun Symbol - Daytime) Mode.
.
Hold the Set Button until the TEMP flashes then release.
.
Now press the Up Arrow button to increase the Daytime - Sun temperature. or
.
Press the Down Arrow button to decrease the Sun-Daytime temperature.
.
You can now press the Set Button to scroll to setting the Night Time Temperature or press off to return to Manual Screen.
h. Setting the Night Time Temperature.
.
Briefly Press the Set Button to scroll to TEMP (Moon Symbol

Night Daytime) Mode.
.
Hold the Set Button until the TEMP flashes then release.
.
Now press the Up Arrow button to increase the Night  Time - Moon temperature. or
.
Press the Down Arrow button to decrease the Night Time

Moon temperature.
.
You can now either leave the handset on the TEMP setting and with the fire lit the room temperature will be controlled or
return to the Manual Screen. Your Settings will remained stored.
Note: With the Temperature Settings now set the Handset will have to be left in the TEMP mode to control the fires temperature.
Note: In the Manual Mode neither of the Automatic TEMP or TIMER settings will be active.
Note: If you Set the Room Temperature below the present room temperature the fire will go straight to the Standby Setting until
the temperature drops below the Set Temperature at which point the main burner will relight.
Note: The Room Temperature is sensed by the Handset so place it in the ideal position to control the room temperature.
Note: An Holder is available for the Handset as an optional extra and this should be positioned to control room temperature.
Note: If at any time you wish to correct or check the settings you have made you can simply keep pressing the Set Button until
the screen displays the Manual Setting and repeat the operations as detailed above.
i. Setting the Timer Programs P1 and P2 for Daytime & Night Time Settings.
.
The Timer Programs are identified by the symbols P1 and P2 on the screen and each can be set for both daytime
(sun symbol) and night time (moon symbol) settings.
Note : Both Programs have to be set, you cannot just set one program, however you can set both at the same settings.
Setting the P1 (Program 1), On Time
.
Briefly Press the Set Button to scroll to TIMER Mode.
.
Hold the Set Button until P1 Sun Symbol (Daytime) is displayed and the time flashes.
.
Press the Up Arrow button to set the Hour.
.
Press the Down Arrow button to set the Minute.
Setting the P1 (Program 2), Off Time
.
Briefly press the Set Button to scroll to the P1 Moon Symbol (Night time) is displayed and the time flashes.
.
Press the Up Arrow button to set the Hour.
.
Press the Down Arrow button to set the Minute.
Setting the P2 (Program2), On Time
.
The Screen will automatically proceed to setting the P2 Settings
.
Briefly Press the Set Button to scroll to the P2 Sun Symbol (Daytime) is displayed and the time flashes.
.
Press the Up Arrow button to set the Hour.
.
Press the Down Arrow button to set the Minute.
Setting the P2 (Program2), Off Time
.
Briefly press the Set Button to scroll to the P2 Moon Symbol (Night time) is displayed and the time flashes.
.
Press the Up Arrow button to set the Hour.
.
Press the Down Arrow button to set the Minute.
.
Both Programs Press Off or simply wait to return to the Manual Screen.
Note : With the Programs now set the Handset will have to be left in the TIMER mode to enable the programs to control the fire.