Indoor Air Quality Products
ViroBlaster
™
Nu-Calgon Product Bulletin
3-144
2611 Schuetz Rd. • St. Louis, MO 63043 • 800-554-5499 • www.nucalgon.com
Calgon is a licensed trade name • (1120) 3-144
• Quickly and easily sanitize your space with
the use of EPA sanitizers and disinfectants
• High atomization density spray and strong
electrostatic capabilities for coverage
• Adjustable spray nozzle emits formula at a
range from 70-150ml per minute
• Rechargeable lithium ion battery provides
30 minutes of run time
• Static coverage of over 16 feet with a spray
distance of over 9 feet
• Heavy duty translucent bottle with ½ gallon
capacity
• Each ViroBlaster comes with a rechargeable
lithium ion battery and charger
Description
The ViroBlaster is a portable electrostatic mist sprayer
designed to quickly, easily, and effectively dispense a
variety of cleaners, sanitizers, and disinfectants. The
electrostatic method of the ViroBlaster helps the product
cling to surfaces much more efficiently than a standard
sprayer. The ViroBlaster uses a rechargeable lithium ion
battery to provide 30 minutes of use efficiently dispensing
product.
Applications
This product must be used in accordance to the following
directions by HVACR professionals only.
Use the ViroBlaster to properly clean and sanitize
classrooms, offices, living spaces, hotel rooms, medical
facilities, and more! The ViroBlaster can spray product at
a distance of over 9feet with a static coverage area of over
16 feet. The ViroBlaster has an adjustable atomizing nozzle
that can provide a range of spray from 70 to 150ml per
minute.
Packaging
ViroBlaster Portable Electrostatic Mist Sprayer
4780-0
Replacement Lithium Ion Battery
4780-1
Replacement Battery Charger
4780-2
Instructions
1. Take the product out of package and check if there are
any parts missing or damaged before using.
2. Check the battery gauge by holding the on/off switch
on the battery pack; if the battery level is less than 50%
(less than 2 LED lights on), please recharge it before
using.
3. Mount the battery pack onto the bottom of the sprayer.
4. Mix disinfectant or chemical liquids in proportion or use
ready-to-use formulas and fill into the 1.8L bottle. Then
screw the bottle onto the sprayer device.
5. Note: Do not fill and use corrosive liquid or ethyl alcohol
with this device.
6. Review the instructions from the solution that you will be
using through the ViroBlaster for proper and accurate
use.
7. Press the on/off switch on back of sprayer to start the
job. The nozzle can be rotated to adjust the spray from
0-150ml per minute.
Warnings and Maintenance
Your ViroBlaster should be stored in such a way to protect
it from freezing. Do not store this unit outdoors or in an
area where temperatures will fall below 0°C (32°F). This can
cause extensive damage to the unit and void the warranty.
After each time of use and before storage, the following
steps should be followed: After each time of use and before
long term storage, fill some clean water into the bottle to
run through the sprayer to clean the residual disinfectant or
chemicals inside the sprayer. Store in a cool, dry place away
from children. Wipe clean with a damp cloth as needed. Do
not immerse sprayer device in water. Remove the battery
pack from the sprayer and recharge it when needed.
FOR BATTERY:
Do not store the battery in elevated temperature for an
extended period of time. Do not put the battery with sharp
or fine metal wire or pins. These materials may touch both
