NTT docomo SC-01L, Инструкция по эксплуатации

Страница: 31 / 191

29
Getting started
4
Insert the docomo nano UIM card/microSD memory card
tray into the terminal
• Take care to insert the docomo nano UIM card/microSD memory
card tray in the correct direction. If the direction you insert the
docomo nano UIM card/microSD memory card tray is incorrect, it
may be damaged.
Information
• For handling the docomo nano UIM card, take care not to touch or
scratch the IC.
• Attaching or removing forcibly may damage the docomo nano UIM
card.
• Be careful not to lose the removed docomo nano UIM card.
• If you lost the SIM ejector tool, you can use a paper clip instead.
Example of a paper clip
microSD card
You can attach microSD card (including microSDHC card and
microSDXC card) to the terminal and use it.
• The terminal supports microSD cards of up to 2 GB, microSDHC cards
of up to 32 GB and microSDXC cards of up to 512GB (as of September,
2018). However, the operations of all commercially sold microSD cards
are not guaranteed.
For compatible microSD cards, contact each manufacturer of microSD
cards.
• The terminal supports up to Class 10 speed microSD cards, the UHS
speed class is Class 3. However, speed class is the performance of
microSD card and does not guarantee all the operation of speed class
performance.
• microSDXC card can be used only with SDXC compatible devices.
As the data saved in the microSDXC card may damage, do not insert
microSDXC card into a device incompatible with SDXC.
• To use microSDXC card with the data damaged again, formatting the
microSDXC card with SDXC compatible device is needed (All data is
erased).
• To copy data to/from SDXC incompatible device, use memory card
compatible with the standard of device for copying to/from such as
microSDHC card or microSD card.
• The saved data to the microSD card from other devices may not be
displayed or played on this terminal. Also, the saved data to the microSD
card from the terminal may not be displayed or played on other devices.