Before Using the Terminal
31
5
Keep the terminal in a horizontal state and
firmly insert the tray straight into the end of the
slot
6
Close the docomo nano UIM card/microSD card
slot cover
→
Removing
1
Open the docomo nano UIM card/microSD card
slot cover
→
2
Insert the tip of SIM ejector into the hole for
removing the tray
→
3
Draw the tray straight
4
Remove the microSD card from the tray.
5
Keep the terminal in a horizontal state and
firmly insert the tray straight into the end of the
slot
6
Close the docomo nano UIM card/microSD card
slot cover
→
Precautions on charging
・
If you use applications while charging, it may take time to complete
charging or charging may not complete due to drop-off of battery.
・
It is normal for the terminal or AC adapter to become warm while
charging. When the terminal becomes warm, charging may stop
temporarily for the safety. When the terminal becomes extremely
hot, stop using immediately.
・
If you start charging with the battery run out, the terminal may not
activate immediately after the power is turned on. In that case,
charge with the terminal kept turned off for a while, then turn the
power on.
・
For charging time, see "Main specifications".
→
Internal battery life
・
The internal battery is a consumable part. Each time the internal
battery is recharged, the battery usage time per one charge
gradually decreases. Calling etc. for a long time while charging may
shorten the lifetime of the internal battery.
・
You can check performance (charging ability) of the internal battery
from "About phone".
→
・
When the battery usage time per one charge becomes about half
of that at the time of purchase, replacing the internal battery is
recommended because the internal battery is near the end of life.
Charging
Содержание MONO MO-01K
Страница 1: ...INSTRUCTION MANUAL 17 10 ...