SPLITMUX Quad Screen 4K 18GB Multiviewer
41
USING THE TEXT MENU
The text menu can be reached either by using a serial command through the RS232 port or a Telnet command through an
Ethernet connection. Either way, a text menu with full feature control can be reached by any administrative user.
Text Menu Navigation
To move up and down the numbered menu items or toggle through field options, use the arrow keys.
To jump from menu item to another quickly, press the numbered key above the QWERTY keys (
the numberpad number
keys are not used
).
To move from menu list to action key (such as “Save” in Figure 31), press <
Tab
>.
To exit an action or menu, press <
Esc
>.
To select a highlighted item or move to another field in a configuration page, press <
Enter
>.
Be sure to Tab to “
Save
” and press <
Enter
> when configuration changes are made.
To return from “Save” back to a field on the configuration page, press <
Tab
>.
From a terminal connection
to the “RS232” port, enter the command “CF
SA” (where SA is the serial address of the
SPLITMUX)
and press <
Enter
>.
From an Ethernet connection through the LAN
, enter the Telnet command “CF” (provided you already have a Telnet
connection as described on page 40) and press <
Enter
>.
You will be presented with a login screen.
1. At “
Username
” type <
root
> (all lowercase letters) and press <
Enter
>.
2. At “
Password
” type <
nti
>
(all lowercase letters)
and press <
Enter
>.
If you are an administrative user, alternatively enter a valid username and password to also access this menu.
Figure 29- Text Menu- Login screen
Note: User names and passwords are case sensitive. It is important to know what characters must be capitalized and
what characters must not.
