manualshive.com logo in svg

NTI RACKMUX Series, Руководство по установке

Поделиться
Скачать
NTI RACKMUX Series Скачать руководство пользователя страница 39

NTI RACKMUX-V17-N-8USBHD-IP  RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP 

 

 

34

 

Alternate Command Hot Key 

 

To enable the administrator to assign a key in addition to the <

`

> (accent/tilde key) to use with <

Ctrl

> to enter into OSD 

Command Mode, an Alternate Command Hot Key option is provided.  The default factory setting for this option is <`> (disabling 
the option).   

 

To select an Alternate Command Hot Key, press <

A

> from the System configuration menu (page 28).  A window will open and the 

administrator will be prompted to press a key. Any key 

except 

Ctrl, Shift, Alt, Tab, Esc, or Enter can be used.   After pressing the 

key, a confirmation message will appear.  The administrator should press <

Y

> (Yes) to validate the key as the Alternate Command 

Hot Key, or <

N

> (No) to select another key.  

 

Pressing <

Esc

> will return to the Administration Mode menu. 

 

Only the administrator is able to set or change the Alternate Command Hot Key. This function must be set individually for each of 
the USB User Device ports on the UNIMUX USB KVM switch. 

 

Note: The Alternated Command Hot Key does not replace the <`> (accent) key, it just works as another way to enter into 
Command Mode. After setting it, the user can enter into Command Mode either with <Ctrl> + <`> or with <Ctrl> + 
<Alternate Command Hot Key> combination. To disable it, the administrator should set <`> as the Alternate Command 
Hot Key. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

                                             Figure 43- Alternate Command Hot Key selection window 

Reset Port names 

 
To erase all configured port names and return them to the factory-default names, 
press <

R

>

 from the System Configuration menu.  After pressing the key, a 

confirmation message will appear.  The administrator should press <

Y

> (Yes) to 

validate the selection or <

N

> (No) to cancel it.  

 
Pressing <

Esc

> will return to the Administration Mode menu. 

 
The switch must be power cycled for the reset to take effect.  
 

                     

                                                                                                            Figure 44- Press "R" to reset port names 

 
 
 
 
 
 
 
 
 
 
 

Содержание RACKMUX Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды