Asphalt and concrete cutters
Operation manual
page
7
issued 01/2017
Never:
use the machine for other than intended
purposes
use the machine in other way than as
described in the Operation Manual
operate the machine drunk or intoxicated
operated the machine if its operation
could cause harm to other people
start and operate the machine if there are
other people within the dangerous area
operate the machine if some safety device
(i.e. cover) is damaged or missing
operate the machine in areas with external
risks (risk of soil flow, dangerous fumes,
risk of explosion, risk of electrical shock,
etc.)
operate the machine in areas where its
operation may cause damage to buildings,
structures or utility lines
operate the machine within the protective
range of power lines or transformer
stations
operate the machine under poor visibility
or at night, unless the jobsite is
sufficiently illuminated
leave unprotected machine
disable
or
modify
safety
devices,
protective and safety systems
operate the machine with leaking oil, fuel
or other liquids
start the engine in other way than
described in the Operation Manual
clean a running machine
smoke or use naked flame when refueling
1.3. Hygienic principles
Oil derivates (fuel, lubricants) as well as paints
and thinners are harmful agents. Anyone who
gets into contact with such agents is obliged to
protect himself and follow general principles
health protection as well as to follow
instructions valid for each specific agent.
Pay special care to:
skin care
wash hands properly after finishing the
work and apply suitable cream
Store the fuels, lubricants, paints, thinners,
cleansing and conservation agents, as well as
other dangerous agents in original containers,
properly sealed. Never allow storing in
unmarked bottles or containers or even in
beverage bottles. Store such agents in safe place,
out of reach of children.
In case that the agent gets into touch with skin
or eyes, or when it is eaten or inhaled, apply the
first aid and get immediately medical aid.
1.4. Environmental principles
Fuel, lubricants and other operational fluids are
harmful to environment. This category also
includes part of the machine that get into contact
with operational fluids, such as filter and
hydraulic hoses.
After use these belong to dangerous waste.
Pay high attention to avoid leakage of the fluids
and their escape into soil or water (including the
sewage).
Store the fluids in such manner, that the fluids
gets caught in case of accidental leakage.
If these agents still escape, arrange their safe
collection and liquidation.
