39
A
A
B
C
D
E
F
Disassembling/assembling the vacuum motor
Proceed as follows to disassemble the vacuum motor:
•
If available, place the machine on a raised platform, otherwise place it on a level fl oor.
•
Using the machine controls, lower the brush and the squeegee, then turn the ignition key to “0” and remove it.
•
Open the battery holder case and disconnect the battery connector (see procedure in the “opening/closing the
battery holder case” section ).
•
Operate on the left side of the machine to unfasten the screws (A).
•
After disconnecting the electrical connector (C) of the vacuum motor, remove the mount unit with the vacuum
motor and fi lter (B).
•
Working at the bench, remove the soundproof gasket (D).
•
Cautiously remove the vacuum motor (E) by disengaging it from the suction fi lter (F).
Proceed as follows to assemble the motor:
•
Reassemble it, following the disassembly operations in reverse order.
Содержание CHAMP 2417 RB
Страница 2: ...2 NSS...
