NSR Marine NGT-200, Руководство пользователя

Страница: 57 / 80

NGT-200 USER MANUAL
NGT-200 UM.E 20210520-02 54
7
SETTINGS
This menu item allows adjusting general tester settings.
All settings are stored in nonvolatile memory and will remain after tester is turned
off.
This menu contains the following
submenus:
Edit MMSI
– editing MMSI to/from;
SHIP ID
– add ship ID marker;
Test config: select the measurement
configuration;
LCD contrast
– LCD contrast adjustment;
Setup date/time
– date/time, date format
setup;
Clear profiles – clear profiles menu;
General info – firmware / hardware and
activated function revision;
U-battery
– internal Li-Ion battery
voltage;
Self test
– self test of NGT-200 tester.
7.1 SETTINGS > EDIT MMSI
You can check the current MMSI number of device under test and of the Tester in
this menu. You can either accept the current number or enter a new MMSI, if
required. Press
◄
, ►, ▼ and
▲
to move the cursor and - , + keys to change
the value. Or simply use numeric keys to input the MMSI number. The data will be
saved automatically by exiting the menu.
To : 413999333
– MMSI number of
DUT;
From: 413999997
–MMSI number of
NGT-200 tester.
Press F2 to clear MMSI number of DUT.
==== SETTINGS ====
Edit MMSI
SHIP ID
Test config
LCD contrast
Setup date/time
Clear profiles
General info
U-battery
Self test
=== Edit MMSI ===
To: 413999333
From: 413999997
F2 – Clear ‘To’