NSK TI-MAX X35, Руководство по эксплуатации, Страница: 12 / 66

10
Temperature
Full Cycle Time
Drying Time
Type
134°C
3 - 18 min
≥30 min
Class B
132°C
≥15 min
≥30 min
Class N
Autoclave Procedure:
1. Scrub dirt and debris from the handpiece, and wipe clean with alcohol-immersed cotton swab or cloth. Do not use a wire brush.
2. Lubricate with PANA SPRAY Plus. Refer to 5. Lubrication.
3. Insert into an autoclave pouch. Seal the pouch.
4. Autoclavable under the conditions below.
5. Keep the handpiece in the autoclave pouch to keep it clean until you use it.
CAUTION
• Do not heat or cool the handpiece quickly. Rapid change in temperature could break the glass rod give abnormal strain to other metals.
• Do not wipe with, or clean or immerse in, high acid water or sterilizing solutions.