22
Operation Procedure
4
Refer to “2-2 Part Names of Control Unit and Main Unit”, which explains the functions of the system in
detail.To start operation, insert the power cord plug into an outlet and turn ON the equipment. The LCD
Display will light. This product has two power control functions. The "Power Key" on the control panel and
the "Power Switch" on the main unit. Use the "Power Key" to turn ON/OFF the power on a daily basis. Use
the "Power Switch" to turn OFF the power when the equipment is not being used for a long period of time
or when the equipment is malfunctioning.
<Mode explanation>
Both NLZ Motor Set and NLZ E Motor Set provide general application mode which is used for dental
restoration and prophylaxis. In this mode, the rotation speed can be adjusted.
The “Rotary Endo Mode” and “Reciprocating Endo Mode” are used for the endodontic procedure, which
are provided only under NLZ E Motor Set.
Rotary endo mode provides low rotation speed for use with gear ratio 1:1, 4:1, and 6:1 handpieces.The
value of rotation speed and torque can be adjusted.
(Refer to “4-2 Rotary Endo Mode (NLZ E Only) <Auto Reverse Function>)
Pressing the “Check” key to perform “Contra-Check” Function before use, the status of a handpiece can
be evaluated as “OK”, “OIL”, “NG” or “NG Blinking”. When the handpiece is evaluated “OK”, the Contra-
Check Function works as a torque calibration. (Refer to “4-4 Contra-Check Function)
Under the reciprocating endo mode, automatic unequal bidirectional rotation is provided. The user can not
alter the preset parameters.
<Mode selection>
System
General Mode
Rotary Endo Mode
Reciprocating Endo Mode
NLZ Motor Set
ݲ
Not Available
Not Available
NLZ E Motor Set
ݲ
ݲ
ݲ
*
*The “Reciprocating Endo Mode” can be operated only with the NLZ Endo Contra Angle handpiece and WaveOne file.
(Refer to “4-3 Reciprocating Endo Mode (NLZ E only)”)