NSK EDD Megatorque Motor, Руководство пользователя, Страница: 142 / 398

6. Operation
— 6-34 —
6.3.6.2. RS-232C Communication Operation

In the velocity control mode and torque control operation, the Motor rotational velocity and output torque
can be directly controlled by the RS-232C communication command.

Setting of the parameter AC (AC0) enables the DC command.
Then, the Motor is controlled by the rotational velocity and the output torque proportional to the data
value.
: DC10
: _
C D
ENT
（
data
）

Fig 6-24 shows the relationship between the DC command data, and the rotational velocity and output
torque.
Fig 6-24: Communication operation command, and Motor rotational velocity and output torque
Relationship between
communication command value
and rotational velocity
＋
32 767
－
32 767
10 s
-1
－
10 s
-1
Operation
command
(DC)
Rotational velocity
Relationship between
communication command value
and output torque
＋
32 767
－
32 767
-100%
100%
Operation
command
(DC)
Maximum torque
！
Caution
• Depending on the parameter DI setting, the polarity of the DC command is
reversed.
• The shipping set value of the parameter DI is "0."
(The CW direction viewed from the Motor rotor is count-up.)
• The rotational velocity of the Motor is limited depending the Motor type.