![NSFOCUS ADS NX3 10000 Series Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/nsfocus/ads-nx3-10000-series/ads-nx3-10000-series_installation-manual_1714409028.webp)
NSFOCUS ADS Installation Guide
Copyright © NSFOCUS
22
V4.5R90F01SP07C236 (2019-11-19)
2
Preparations
2.1
Accessories Supplied with the Device
Before installation, make sure that the following items are included in the accessory box
delivered with the device:
−
Straight-through cable (green): used for network connections
−
Crossover cable (yellow): used to connect a computer to the management interface of
ADS devices so that you can log in to the web-based manager to perform
configurations
−
Power cable: one or two power cables for each device
−
Rubber pad: cut into four pieces along the dotted line and attached to four angles or
tags of the device chassis to avoid abrasion
−
Rack-mounting ear: used to fasten the device to the rack
−
Rack-mounting screw: used to fasten the device to the rack
−
Console port cable: used for the configuration of the device console
Accessories supplied may vary with
the
product model.
For the specific items,
refer to
the packing list.
Besides the stuff in the accessory box, prepare the following:
−
IP address: IP address reserved for ADS devices. You are advised to reserve both an
IPv4 address and an IPv6 address for an ADS device.
−
Computer: directly connected to the management interface of the ADS device so that
you can log in to the web-based manager of the device in HTTPS mode for
management.
−
Terminal software: connected to the console port, for example, HyperTerminal pre-
configured in the Windows operating system.
−
Browser: make sure that a web browser is available on the computer. IE 8.0 through
10.0 and Chrome are recommended.