STAND FITTING
♦
Lay the sensor face down on a firm surface.
♦
Push in one side and then the other until
they click into position
♦
Move up or down for desired viewing angle.
To remove stand to more easily access the
battery housing:
♦
Flatten stand so it is parallel to the unit
♦
Gently squeeze thumb under one side of the
stand until it clicks
♦
Lift off the base.
BATTERY & PRODUCT DISPOSAL INFORMATION
♦
Do not mix products bearing the crossed
out bin symbol with your general household
waste. For the correct collection and
treatment of these products take them to
the collection points designated by your
local authority.
♦
Alternatively contact the retailer who sold
you the product.
♦
Remember, when you dispose of the
thermometer to remove the batteries and
dispose of them responsibly.
MAINTENANCE
♦
To clean the product, wipe with a soft cloth
to remove dust.
♦
If the temperature and humidity display is not
visible then the battery cells are exhausted &
need to be renewed.
UK GUARANTEE
This product is guaranteed free from defects in
materials and workmanship for a period of one
(1) year. Proof of purchase is required for validity
of the guarantee. This guarantee is no longer
valid if the damage has been caused by fall,
alteration or repair by any unauthorised persons.
This warranty is in addition to, and does not
affect, your statutory rights.
The product you buy may sometimes differ
slightly from illustration.
This product has been manufactured to comply
with EC directive 2004/108/EC as
amended EN 61000-6-3 & 1: 2007
& RoHS 2002/95/EC
TECHNICAL DATA
Model No:
HGTM-02
Voltage:
3V DC
Batteries:
2 x LR 44
Ref:
HGTM-02/IM/1611
Dims (WxDxH):
57 x 40 x 70mm
Weight:
NW: 60gm
GW: 90gm
© 2016 Newton Stovold Associates Ltd
GU8 6AA / www.nsauk.com
DIGITAL HYGROMETER
& THERMOMETER
Model: HGTM – 02
www.nsauk.com
Please read this instruction
manual before operating and
keep safe for future reference.