30st
190kg
To fit the seat:
Place the seat on the frame in the correct
position, with the front of the seat and curve
of the armrests facing forwards, figure 2.
Push down firmly on the seat until it snaps
into position on both the front and rear cross
bars.
To install the Mowbray Lit Plus:
Place the frame over the toilet ensuring that
the internal splash guard is central over the
toilet bowl, figure 1.
User Instructions
N53909 Mowbray Lite Plus
Maximum User Weight
General Safety Warning
Please ensure these instructions are fully read and
implemented. Failure to do so may result in injury.
Retain these instructions in a safe place for future
reference.
1.0 Intended Purpose
The Mowbray Lite Plus is designed to assist users
when lowering onto and rising from the toilet. The
frame provides a stable support when getting on
and off the toilet and the moulded seat offers a
comfortable seating position. The seat lid adds
discreet style and helps to improve cleanliness and
hygiene.
2.0 Safety Precautions
Do not exceed the maximum user weight 30st
190kg.
Do not attempt to stand or climb on the product.
Ensure all legs are set at equal height to avoid
rocking.
3.0 Unpacking
Remove packaging and check all parts carefully,
see figure 3. If any parts appear damaged do not
assemble and contact your supplier immediately.
4.0 Assembly Instructions
To fit the crossbars:
Push the crossbars onto the tube stubs on
the LH & RH frames.
Set to the desired width, align the holes and
insert the ‘e-clips’.
Ensure that both cross bars are set to the same
width.
To fit the legs:
Insert the leg extensions inside the LH & RH
frames and slide to the desired height.
Align the holes and insert the ‘e-clips’.
Use the markings on the legs to ensure that all four
legs are secured at the same height to prevent
rocking and instability.
Figure 1 – Seat Lid
Open
Figure 2 – Seat Lid
Closed
1
Figure 3 - Contents
1
Toilet Seat & Lid X 1
4
Crossbar X 2
2
LH Frame X 1
5
Leg Extension X 4
3
RH Frame X 1
6
‘E-clip’ X 8
2
3
4
6
5
5
1
