30st
190kg
User Instructions
NRS EasyFit Bed Rail
General Safety Warning
Please ensure these instructions are fully read and
implemented. Failure to do so may result in injury.
Retain these instructions in a safe place for future
reference.
1.0 Intended Use
The EasyFit Bed Rail provides stable support to
assist clients getting into and out of bed. When in
bed the rail can be used to aide users rising to a
sitting position or repositioning when lying.
Designed for use with divan beds, most slatted
domestic beds and is suitable for all bed sizes from
single to king-size.
2.0 Safety Precautions
WARNING! To avoid possible head entrapment,
position the Bed Rail at least 320mm (12½
”
) away
from both headboard and footboard. See figure 3.
Always ensure that the mattress is as close as
possible to the Bed Rail. Any gap could allow the
client to become wedged in-between.
Do not exceed the product maximum user weight
190kg, 30st.
Do not fit this product to profiling beds.
Not suitable for use by children.
3.0 Unpacking
Remove packaging and check all parts carefully. If
any parts appear damaged, do not assemble and
contact your supplier immediately.
Contents:
Bed Rail Handle X 1
Bed Rail Base X 1
E-Clip X 2
Strap (Product M76333 only) X 2
4.0 Assembly
Slot both ends of the Bed Rail Base into the handle
and secure using the ‘e-clips’, figure 2.
Maximum User Weight
M76333
With Straps
M76321
Without Straps
Figure 3 – Fitted to Divan Bed
A
B
C
320mm
(12.5”)
Minimum
Figure 1 – EasyFit Bed
Rail
e-clip
Bed Rail
Handle
Bed Rail
Base
Figure 2 - Assembly