background image

1

USER INSTRUCTIONS

LINTON PLUS RAISED TOILET SEAT

General Safety Warning

Please make sure that you read and follow these 
instructions carefully. Failure to do so can result 
in injury. Keep these instructions in a safe place 
for future reference.
1.0 INTENDED USE

The Linton Plus toilet seat’s raised design makes sitting and standing from the toilet easier, with less strain 
on the user’s joints. The cut-out seat design makes personal cleansing easier and distributes pressure 
more evenly away from the coccyx. The seat is adjustable and 

fi

 xes securely to standard shaped toilets. 

Seats are available in 3 sizes and can be supplied with or without a lid.

2.0 SAFETY

The maximum user weight must not be greater than 
30st (190kg).
Inspect the seat and 

fi

 xings at regular intervals to 

make sure that it is safe and secure.
Do not use the seat unless you are sure it is safe to 
do so. If in doubt, contact your supplier for advice.
Inspect the seat and 

fi

 xings at regular intervals for 

wear and damage.
If damage is found, stop using the seat and contact 
your supplier immediately for advice.

1

2

Figure 1:  Raised Toilet Seat Assembly

3.0 UNPACKING

Refer to Figure 1. Remove the packaging and check 
all parts carefully. Contact your supplier immediately 
if parts are missing or damaged and do not try and 
assemble.

Contents:

1.  Linton Plus Raised Toilet Seat x 1
2.  Support Bracket and Handwheel x 2

4.0 ASSEMBLY
4.1  Fitting the Support Bracket:

The support bracket and hand-wheel screw assembly 
must be 

fi

 tted to the seat, before 

fi

 tting to the toilet.

Figure 2:  Fitting the Support Bracket

1.  Refer to Figure 2. Slide the support bracket into 

the slot on the toilet seat.

2.  Turn the hand-wheel clockwise until the threads 

engage.

Note: 

Do not tighten any further at this stage.

3.  Repeat steps 1 and 2 for the opposite side.

4.2  Fitting to the Toilet:

1.  Make sure that the existing toilet is safe and 

secure before you attempt to 

fi

 t the product.

2.  The existing toilet seat and lid must be lifted 

before the product can be 

fi

 tted.

3.  Check that the support brackets are securely in 

place before 

fi

 tting.

M53564 2” (50mm) Raised Toilet Seat

P42469 4” (100mm) Raised Toilet Seat with Lid

P42458 2” (50mm) Raised Toilet Seat with Lid

P42446 6” (150mm) Raised Toilet Seat

M53576 4” (100mm) Raised Toilet Seat

P42471 6” (150mm) Raised Toilet Seat with Lid

Maximum User Weight

30st

190kg

Отзывы: