NRI v2 eagle Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 57

background image

BA_v2_eagle_parallel_EN_1-0

11

s

afeTy

insTRucTions

3

Safety instructions

Before starting up the device for the first time, please read these instructions and in particular

the safety instructions carefully at least once. This is to ensure that you have understood the

contents of this manual and how to operate the coin validator.

3.1

Proper use

The electronic 5“ coin validator v

2

eagle with parallel BDTA or BACTA interface is intended for

use in slot and vending machines with parallel BDTA or BACTA interface and is designed to

check the coins inserted into the machine for specific properties and to accept (and sort) or

reject them. Use the coin validator exclusively for this purpose. Under no circumstances can the

manufacturer be held liable for any damage or loss resulting from improper use of the device.

The coin validator has been built in accordance with state-of-the-art standards and the recognized

safety rules. Nevertheless, this equipment can constitute a source of danger. Please observe

therefore the following safety instructions.

3.2

Protecting persons and equipment

The coin validator must only be connected by a trained electrician.
Use the coin validator only in accordance with its proper use. Under no

circumstances can the manufacturer be held liable for any damage or loss

resulting from improper use of the device.

The coin validator PCB is fitted with components which may be damaged

beyond repair by electrostatic discharges. Please observe the handling

instructions for components exposed to the risk of electrostatic discharge.
Select the correct voltage for the coin validator (see label).
Pay attention to correct electrical bonding in the machine.
Never pull the connecting cable of the coin validator from the machine when

a voltage is applied.
Pull the mains plug of the machine before installing, cleaning or removing

the coin validator.
Please consult Crane Payment Innovations if you intend to make additions

or modifications to the device that go above and beyond the modifications

described here.
Keep water and other liquids away from the coin validator.

Please dispose of the device correctly at the end of its service life.

We reserve the right to make technical modifications to the device which

are not covered by these instructions!

«
...
9
10
11
12
13
...
»

Содержание v2 eagle


























































Отзывы:

Нет отзывов

Похожие инструкции для v2 eagle

Бренд: Olympia Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды