NRI Currenza H2 Hopper Series, Техническая документация инструкция

Страница: 25 / 47

25
National Rejectors, Inc. GmbH, Buxtehude
S
TART
-
UP
Fig. 8a: Inserting hopper in mounting
bracket
2
1
3
Fig. 8b: Engaging safety flap
Mounting and filling hopper
1
Slightly tilt the hopper at the rear
and use its two mounting
studs [8a/1] to slide the hopper in
the rear guides [8a/2] of the
mounting bracket.
2
Press the hopper into the
mounting bracket, so that it
engages behind the ejector
lever [8a/3] of the mounting
bracket.
Make sure that the safety
flap of the hopper is
installed correctly and
engaged in the hopper
bowl on both sides, so
that the rotating parts are
protected against access
during hopper operation
and the coins are
transported to the coin
outlet optimally.
3
Fill the hopper with coins.
4
Reconnect the power supply to the machine.