NRG Instructions
SRA System | All-Weather PVH Kit
SRA_All-Weather_PVH_Kit_Instructions
Rev. 5.0
[email protected] | Page 20
18 April 2018
SECTION 4: WIRING THE ALL-WEATHER SYSTEM
4.1 Wiring the Ventilator to the Control System
The VU01 is supplied with a multi-conductor cable which plugs into the ventilator. At the other end, the
bare wires connect to the All-Weather Control System according to Figure 4-1 and Table 4-1 below.
Figure 4-1
Note that the blue wire from the VU01 cable connects to the red wire of the supplied NRG 4C cable by a
butt connector. Crimp the connector properly to ensure that the bare wire ends adequately make
contact with each other.
Blue|Red|Pink|Brown|Yellow|Gray|Green|Black
