NRG Instructions
SRA System | All-Weather PVH Kit
SRA_All-Weather_PVH_Kit_Instructions
Rev. 5.0
[email protected] | Page 13
18 April 2018
Figure 2-14: Inner components of Figure 12 assembled onto tower.
Complete removal of the outer components is not necessary.
Mount the 48” angle adjustment rails to the outer brackets of the assembly through the slide nuts
(Figure 2-15). Orient the rail such that the hinge attached to the end is at the top and the semicircular
piece is facing the PV frame.
Figure 2-15: Complete assembly of lower tower/angle adjuster mount. Aluminum rail is mounted onto
slide nut and outer bracket is not tightened down.
