V1.0
1
SPM05 Series
ZigBee Wireless PIR Motion Detector User Manual
2. Specifications
3. Installation
Network protocol
Compliant IEEE 802.15.4 ZigBee
2007/PRO
Frequency
ISM 2.4 GHz
Channel
16 (11~26)
RF output power
0 dBm
Receiver sensitivity
-95 dBm
Communication range
Up to 100m / 328 ft
Working voltage
3V DC (CR123A battery) (SPM05)
5V DC (US-type AC adapter) (SPM05-
H1)
Antenna
PCB Antenna
Configure parameters
Baud rate, Pan ID, RF Channel
adjustable
Network supports
Star , Tree , Mesh
Auto reconnection
yes (Zero Data Loss technology)
Working Temperature/
Humidity
0˚C~50˚C / 32˚F~122˚F, 0~75% RH
Storage Temperature
-20˚C~60˚C / -4˚F~140˚F
Indoor White Light
Resistance
More than 9000LUX
Max. Current
Consumption
Tx: 35 mA ; Sleep: 1.3
m
A
Max. Coverage Area
9m / 23ft (12m / 46ft max.) // 100
度
DIP
Switch
Tamper
Switch
Power Cord (SPM05-H1)
Poten-
tiometer
S1 Button
LED
Infrared Detector
Mounting Base
Battery
Compartment
(SPM05)
Powering ON the Detector
1. SPM05: Install or replace battery.
2. SPM05-H1: Plug AC adapter to live AC mains.
Installation Location
1. Height range: 2.0 to 2.5M
2. Mounting base adjustment angle:
45 degrees
Package Contents
1. Detector, moun g package (moun g
base, screw x 2, wall plug x 2)
AC to 5VDC adapter (SPM05-H1)
2.
MAC+SN
Back Lid
Latch
Back Lid
Securing Screw
Back Lid
Alarm Indication
Alarm LED ON for several seconds
Dimensions
(LxWxH)
95 x 64 x 49 mm / 3.74 x 2.52 x 1.93 in
Weight
92 g / 3.25 oz (w/ battery) ;
59 g / 2.08 oz (w/o battery)
Opening/Closing Back Lid
1. Loosen back lid screw. Use flat-tip tool to push
in back lid latch, then remove back lid.
2. After internal settings or battery replacement,
replace and close back lid, then secure back lid
screw.
Side View
Motion Detection Zone – Top View
1. Introduction
SPM05 series (WZB-SPM05, WZB-SPM05-H1)
wireless PIR motion detector detects human body
movement with digital processing and sophisticated
radio communication protocol to minimize false
alarms and maximize stability. The detector auto-
tests and reports status periodically for full
supervision via Sentrol Cloud. Built-in tamper switch
triggers alarm upon any tamper activity.
SPM05 Series have following model options (may be
commonly referred in this manual as SPM05):
WZB-SPM05 – Battery-powered
WZB-SPM05-H1 – AC-powered (US type plug)
