background image

8

Ref/Set key

Provides two functions:

 

To set Reference 

 

To display Reference 

OPM4 Models

Ref

Set

8888

A

B

Display Readings - Splash and Auto Off Screen

8888

Splash (Version) screen:

 During power up, the OPM4 

software version is shown on the top line 

A

. The OPM type 

and detector type are shown on the next line 

B

. The Splash 

screen will be automatically replaced by the Test screen after 
~ 2 seconds.

Auto Off screen: 

When the unit is about to power off due to 

inactivity, then display will show “OFF” 

B

 and count down 

the number of seconds until power will be shut off.

Test Mode: To Set Reference

1.  Set your OPM4 to the desired measurement mode (dB, dBm, µW).
2.  To store the currently measured level or multiple levels as the new reference levels, press and hold 

the Ref key until the label HELD SET is displayed.

3.  Once the new reference is set, the OPM4 switches to the dB measurement mode.
 

Note:

 When setting references from multiple wavelength ID’d sources, allow several seconds prior to 

setting the references for wavelengths to be ID’d and measured.

Test Mode: To View Reference

1.  Press the Ref key to display the stored reference level for the currently selected wavelength or 

detected WAVE ID wavelength(s). The reference indicator REF 

1

 and reference value(s) will be 

briefly (for about 2-3 seconds) displayed as follows:

CW mode 

- the reference value will be displayed in the field 

2

Single WAVE mode

 - the reference value will be displayed in the field 

2

Dual WAVE mode -

 the reference values will be displayed in the fields 

2

 and 

3

Tri WAVE mode -

 The reference value will be displayed in the fields 

2

 and 

3

 on the first page and in 

the field 

2  

on the second page (replaces first page automatically in ~ 2 seconds). 

 

-5.42

1490

nm

-5.15

1310

dBm

dBm

dBm

nm

nm

WAVE ID

WAVE ID

2

2

3

1

1

REF

REF

-5.48

1550

Single WAVE mode, or 

Tri WAVE mode - second page

Dual WAVE mode, or

Tri WAVE mode - first page

Содержание AFL OLS Series







































Отзывы: