NVS-100E/O, NVS-110E/O surge protectors, ver.1.0
All rights reserved © AAT Holding Sp. z o. o.
1
NVS-100E/O, NVS-110E/O
EMC (89/336/EEC) and LVD (73/23/EEC) Directives
CE Marking
Our products are manufactured to comply with requirements of the following directives and national regulations implementing the directives:
- Electromagnetic compatibility EMC 89/336/EEC with further amendments
- Low-voltage LVD 73/23/EEC with further amendments. This directive applies to electrical equipment designed for use with a voltage rating of between 50VAC and 1000VAC as well
as 75VDC and 1500VDC.
WEEE 2002/96/EC Directive
Information for users who want to get rid of electrical and electronic appliances
This product is marked according to the European Directive on Waste Electrical and Electronic Equipment (2002/96/EC) and further amendments. By ensuring this product is disposed of
correctly, you will help to prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or the documents accompanying the product, indicates that this appliance may not be treated as household waste. It shall be handed over to the applicable
collection point for the waste electrical and electronic equipment for recycling purpose. For more information about recycling of this product, please contact your local authorities, your
household waste disposal service or the shop where you purchased the product.
2002/95/EC RoHS Directive
Out of concern for human health protection and friendly environment, we assure that our products falling under RoHS Directive regulations, regarding the restriction of the use of
hazardous substances in electrical and electronic equipment, have been designed and manufactured in compliance with the above mentioned regulation. Simultaneously, we claim
that our products have been tested and do not contain hazardous substances whose exceeding limits could have negative impact on human health or natural environment.
Information
The device, as a part of professional CCTV system used for surveillance and control, is not designed for self installation in households by individuals without technical knowledge.
The manufacturer is not responsible for any defects or damages resulting from improper, or inconsistent with user’s manual, installation of the device in the system.
1.
Tech parameters:
E/O PN-EN 61643-21-compliant surge protectors are designed to protect electrical devices operating in Ethernet 10/100/1000 Mb/s network and connected via an overhead UTP cable.
NVS-100E/O is a first line of protection for overhead connections, protecting each of the four wire pairs and discharging excess energy to the electrical ground. In order to obtain declared
protection level, please connect it to the proper electrical grounding (i.e. not the lightning rods) or a PE wire. NVS-100E/O is used best in conjunction with NVS-100E or NVS-810E inside
the building. Devices feature gas discharge tubes.
Attention!
In order to provide declared protection level all appropriate lead-outs of the device should be grounded.
2.
Surge protector overview:
NVS-100E /O
Protection device used in the network transmission via overhead UTP cable. Two RJ-45 sockets (I/O). Plastic casing, PE wire attached. Features gas discharge tubes.
NVS-110E /O
NVS-100E/O is a ruggedized variant of the NVS-100E/O. Metal casing provides better resistance against mechanical shocks and ensures better electromagnetic shielding of surge
protection circuit. Features gas discharge tubes.
Usage of shielded RJ45 allows to ensure shielding continuity when using STP cable. Socket shielding is also grounded.
Model
NVS-100E/O
NVS-110E/O
Nominal voltage
120V
Maximum voltage
150V
Circuit protection level
U
p
≤
1000V - 1,2/50
µ
s, C2
Nominal discharge current
i
n
=2 kA (8/20
µ
s)
Socket types
RJ-45
Dimensions (mm)
66(W) x 60(H)
x 30(L)
95(Wr) x 50(H)
x 30(L)
Weight
80 g
160 g
