Novexx ALX 924 Скачать руководство пользователя

Страница: 7 / 91

User Manual

ALX 92x

09/2016 | 01

Please note

Please note

GENERAL NOTES

Validity of this manual and required compliance

Contents

The complete operating manual for the ALX 924, ALX925 and ALX 926 print & apply systems con-
sists of the following parts:

This operating manual refers exclusively to the machine types listed above. It is used for proper
operation and adjustment of the machine.

The machine must be properly installed and configured to allow for operation and settings.

For information about the required qualification, see section

Information and qualification



page 10.

For information about installation and configuration, see the service manual.

For technical questions not covered in this operating manual:



Follow the instructions of the service manual for the label dispenser



Request a service technician from our sales partner.

Our sales partner's customer service department is available especially for configuration settings
and malfunctions.

Technical release

Technical release: 2/2016

Software version: 6.60

Liability

Novexx Solutions reserves the right:

• to make changes in design, parts and software and to use equivalent parts instead of those

specified for the purpose of technological progress.

• to change information in this manual.

Any obligation to extend these changes to machines previously delivered is excluded.

Copyright

Novexx Solutions retains all rights to this manual and its appendices. Reproduction, reprint or any
other type of duplication, including parts of the manual, are permitted only with written approval.

Printed in Germany

Manual

Target group

Medium

Availability

User manual

Operating personnel

Printed

Comes with machine

Installation manual

Service personnel

User-Docu-CD

Service manual

Service-Docu-CD

Must be ordered
separately

a) Only for certified and qualified service technicians or OEM partners.

Spare parts catalogue

Содержание ALX 924




























































































Результаты поиска

Содержание ALX 924

Отзывы:

Похожие инструкции для ALX 924

Бренды по названию

Популярные бренды

Novexx ALX 924, Руководство пользователя

Результаты поиска

Содержание ALX 924

Отзывы:

Похожие инструкции для ALX 924

Бренды по названию

Популярные бренды