Novexx ALX 924 Скачать руководство пользователя страница 43

Страница: 43 / 91

User Manual

ALX 92x

09/2016 | 00

Standalone mode

In standalone mode, print jobs are not transferred via data cable but are instead stored on a mem-
ory card. You can access them there from the printer control panel or using a connected keyboard.

Activate standalone mode

1. Switch off the machine.
2. Save relevant print jobs in the

\Formats

directory on the memory card.



Files with print jobs must have the ending

*.for

3. Insert the memory card in the printer's card slot.
4. Switch on the machine.

Initial operating mode: online or offline.

5. Press the PROG keys.

Screen:

Screen if no file was found:

Starting a print job

1. Activate standalone mode as described above.
2. If there are several print jobs: Press the FEED / APPLY keys keys until the required print job

appears.

3. Press the ONLINE key to confirm the selection.

Screen:



Depending on the print job, the user may be prompted for additional entries.

4. Press the ONLINE key to confirm the number or the Esc key to delete the number.
5. Proceed in the following manner for each required digit:

– Press the FEED / APPLY keys to select a number from 0 to 9.
– Press the ONLINE key to move to the next digit.

6. Press the ONLINE key twice to confirm the selection.

The print job is now processed.

7. You can also optionally press the PROG keys to switch to online mode.

Select file

Novexx.for

a) Filename of the print job. If there are several print jobs: fi-

lename of the first print job in alphabetical order.

Standalone

No files!

Enter quantity

a) Assignment for quantity (in this case x) is included in the

print job.

Содержание ALX 924




























































































Результаты поиска

Содержание ALX 924

Отзывы:

Бренды по названию

Популярные бренды

Novexx ALX 924, Руководство пользователя

Результаты поиска

Содержание ALX 924

Отзывы:

Бренды по названию

Популярные бренды