User Manual
XLP 604
Illustrations
Illustrations appear in the text where required. References to the illustrations are shown in brackets, if
necessary (see table).
Reference to illustration
Application
none
• Only one illustration
• Reference to the illustration is obvious
• No position number in the illustration
(A)
• Only one illustration
• Reference to the illustration is obvious
• Position number in the illustration
(see fig. above)
• Several illustrations
• No position number in the illustration
(see fig. above, pos. A)
• Several illustrations
• Position number(s) in the illustration
Table 1: Differenet references to illustrations.
Parameters
Parameters in the parameter menu are represented in the format
Menu name
>
Parameter name
in
grey type.
FOR YOUR SAFETY
Intended use
The label printers of the XLP 60x series are designed for printing label material, using the thermal or
thermal transfer printing process. In addition, the dispenser version of the printers can dispense self-
adhesive labels and can rewind the remaining backing paper (ar alternatively the complete label ma-
terial). It is possible to use a wide range of label materials and thermal transfer ribbons. Label stock
must be in roll shape or fan-folded. The label web can optionally be pulled-in from outside the printer
through the slots in the rear side or bottom plate.
Observe the technical specifications of the printer, see chapter
on page 11. Any
other type of or more extensive application will be considered
abnormal use
.
Operating position
: The XLP 60x is a desktop printer. The intended use position is as shown standing
on a firm, flat, horizontal surface (e.g. on a table).
Edition 2 - 12/2021
7
Please note!
For your safety
