Novexx Solutions XLP 604, Руководство пользователя

Страница: 49 / 124

User Manual XLP 604
The zero point of the mask is moved in relation to the edge of the label on the Y axis, i. e. in the feed
direction.
• Maximum offset in feed direction: +15.0 mm
• No offset: 0.0mm
• Maximum offset against feed direction: -15.0 mm
If the setting is changed, while the print job is stopped, the printer recalculates the format using the
changed values.
Caution with graphics, which are generated via one of the Easy Plug commands #YI, #YIR or #YIB!
If the graphics is shifted beyond the label border as a consequence of changing the parameter X -
Printadjust , the part of the graphics which "juts out" will get lost.
Print speed
Setting range Default setting Step width Easy Plug
XLP 604: [3..16] Inch/s 8 Inch/s 1 Inch/s #PC1003, #PR
The print speed (material feed) can be adjusted according to the ribbon and material combination be-
ing used in order to optimise the contrast depth and the density of the print image.
Delete Job
Setting range Default setting Step width Easy Plug
-- -- -- #!CA
Pressing key 4 cancels the active print job.
Delete Spooler
Setting range Default setting Step width Easy Plug
-- -- -- #!CA
Pressing key 4 deletes all print jobs queued in the spooler.
Print method
Settings Default setting Step width Easy Plug
Thermo transfer,
Thermal printing
Thermo transfer -- #PC2018, #ER
• Thermo transfer : Thermo transfer printing (ribbon end sensor is switched on)
• Thermal printing : Thermo direct printing (ribbon end sensor is switched off)
Detect label length
Only works if label material is inserted.
Measures the label length and writes the value to parameter Material length . During the measurement,
the label material is fed approx. 2 label lengths.
Edition 2 - 12/2021 49 Product Description
Parameter menu