Novexx Solutions XLP 514, Руководство пользователя

Страница: 47 / 116

User Manual XLP 514/516
Parameter Reference
Print contrast
Setting range Default setting Step width Easy Plug
[1...105] % 50% 1 #!H, #PC2045
CAUTION!
The parameter Print contrast affects directly the life durance of the print head. It
counts: „The higher the setting of Print contrast is, the lower is the life durance
of the print head“. This counts even more for settings above 100%. Therefore
mind:
► Always choose the lowest possible setting necessary to produce an accept-
able print result.
Head pressure
Setting range Default setting Step width Easy Plug
[1.0...3.0] 2.0 0.1 #PC2045
Setting of the pressure that presses the print head at the print roller (1=low pressure, 3=high pres-
sure).
The setting corresponds to the adjustment-knob settings “I” to “III” at older machine types.
X - Printadjust
Setting range Default setting Step width Easy Plug
[-15...15] mm 0.0 mm 0.1 mm #PC1020
The zero point of the mask is moved in relation to the edge of the label on the X axis, i. e. lengthways
to the material.
• Maximum offset away from the edge of the label: +15.0 mm
• No offset: 0.0mm
• Maximum offset towards the edge of the label: -15.0 mm
If the setting is changed, while the print job is stopped, the printer recalculates the format using the
changed values.
Caution with graphics, which are generated via one of the Easy Plug commands #YI, #YIR or #YIB!
If the graphics is shifted beyond the label border as a consequence of changing the parameter X -
Printadjust , the part of the graphics which "juts out" will get lost.
Y - Printadjust
Setting range Default setting Step width Easy Plug
[-15...15] mm 0.0 mm 0.1 mm #PC1021
Edition 1 - 8/2021 47 Product Description
Parameter menu