Operating manual
LTSA LTMA
SYSTEM REQUIREMENTS XLP 504 WITH LTSA
The XLP 504 must be equipped not only with the necessary firmware version, but also with a few
special parts in order to be able to be operated together with a LTSA. This “XLP 504 for LTSA” can be
ordered ready for operation or retrofitted.
Necessary firmware version
7.75
Necessary parts
The following parts must be available for operation of a XLP 504 with LTSA:
Item
Name
Note
A
Applicator LTSA
B
Enclosure part
C
Dispensing edge
D
Sub-D cable harness
Different part than in XLP 504 “Peripheral”
E
Internal rewinder
F
BLDC output stage
G
M5A output stage
Different part than in XLP 504 “Peripheral”; minimum
required firmware version for output stage: 4.48
Fig. 6: The parts marked in colour are required for operation of a XLP 504 with LTSA (blue = included in retrofit kit LTSA).
Edition 02 - 7/2021
11
Product description
System requirements XLP 504 with LTSA
