Novexx Solutions ALX 92x, Руководство по обслуживанию

Страница: 605 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
83
Generally can be chosen between thermal transfer printing and thermal direct
printing. It is necessary to select the type of printing in order to be able to
switch over the ribbon end detection.
Switching on the Ribbon automatic economy mode in thermal transfer mode
interrupts the ribbon feed between print periods. This saves ribbon, particu-
larly with long labels with a minimum print area. The additional feature in tur-
bo mode is that a higher feed speed is used between the print periods. The
feed speed is set in
PRINT PARAMETERS > Feed speed.
With the setting „ Thermal/headlift “ activated in thermal direct mode, the print-
head is lifted between print periods. This reduces printhead abrasion.

The settings „On“,
„
Thermal/headlift
“
and „On Turbo“ should only be
activated with unprinted areas from at least approx. 10 mm in length.
Thermal/headlift Thermal direct printing with printhead lifting
Thermal printing Thermal direct printing (Ribbon-end-LS switched off)
On
Thermal transfer printing with ribbon automatic economy mode on
Off
Thermal transfer printing with ribbon automatic economy mode off
On Turbo
Thermal transfer printing with turbo ribbon automatic economy mode on
Ribbon economy limit
64-xx DPM PEM ALX 92x
The ribbon economy limit determins the length of the printing free area on the
label from that on the ribbon economy automatic should be activated.

Only with
SYSTEM PARAMETER >
Ribbon autoecon. = „
On“.
x,xx mm Setting range: xx up to 100,0 mm; Unit interval: 0,1 mm (the initial value de-
pends on the feed speed)
Default-value: 5.0 mm
Head down lead
64-xx DPM PEM ALX 92x
Defines the distance the printhead has to touch down before the first printed
dotline. The function improves the print quality when entering a printed area
with activated ribbon autoeconomy function.

Only with
SYSTEM PARAMETER >
Ribbon autoecon. = „
On“.

Only in production mode or with a setting of x > 0.
x.x mm Setting range: [0.0...10.0] mm; Default setting: 0.0 mm; Step width: 0.1 mm
Feed mode
64-xx DPM PEM ALX 92x
Head up (Default) The printhead is lifted during label material initialization and label
feeding.