Novell ZENworks 10 Configuration Management Asset Inventory, Справочное руководство, Страница: 67 / 144

Scanning Demographic Data 67
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Default: Specify any value you want to use as a default value.
Choice List: If there is more than one possible response, click Edit and specify the available
responses. You can also choose to allow the workstation user to create entries by selecting
Allow user created entries .
Edit Mask: Allows you to restrict how a user enters a response by selecting a format from the
list in the Edit Mask field. The choices are phone, time, and currency.
Instructions: Add any instructions for the workstation user.
12
Click Apply or OK , or click Reset to revert to previous settings.
NOTE: You can also create custom fields, called administrator-defined fields, to gather additional
data. For more information, see Chapter 7, “Using Administrator-Defined Fields,” on page 111 .
4.1.3 Configuring the Collection Data Form for a Device
1
In ZENworks Control Center, click Devices .
2 Click the Managed tab.
3
Click the folder that contains the device you want to configure.
4 Click the device.
5 Click the Settings tab.
6 In the Settings panel, click Inventory .
7
In the Catalog panel, click Collection Data Form .
8 Click Override settings .
This overrides the Management Zone and folder settings for this device.