Novell ZENworks 10 Configuration Management Asset Inventory Скачать руководство пользователя страница 140

Страница: 140 / 144

140

ZENworks 10 Configuration Management Asset Inventory Reference

cx (e

16
Ap
ril 20

where

ipaddress

is the address of the server.

(Optional) To immediately post the scan, restart the zenaa module.

LDAP Import Tasks remain in a pending state if run simultaneously

Source: ZENworks 10 Configuration Management; Asset Inventory.

Explanation: If an LDAP import task has not finished and you simultaneously run a new

task, the new task is not started and remains in a pending state.

Possible Cause 1: Multiple tasks are running simultaneously.

Action 1: Before running a new task, ensure that all the existing tasks are in a finished

state.

Possible Cause 2: Multiple tasks have been configured to run on the same schedule.

Action 2: Ensure that you do not set the same or simultaneous schedule for multiple

tasks.

Inventory Only managed device is unable to post scans

Source: ZENworks 10 Configuration Management; Asset Inventory.

Possible Cause: The

uiaconfig.xml

file might be corrupted.

Action: Do the following:

In the

uiaconfig.xml

file, add or change the IP address in the following

line:

Server="a.b.c.d"

where

a.b.c.d

is the server IP address.

On Linux,

uiaconfig.xml

is located in

opt/novell/zenworks/umia

(Optional) To immediately post the scan, restart the zenumia service.

Inventory data of a managed device is not displayed for the Linux Primary Server

Source: ZENworks 10 Configuration Management; Asset Inventory.

Explanation: The inventory data of managed devices is not displayed for the Linux Primary

Server in ZENworks Control Center.

Action: Install the inventory-only agent on the Linux Primary Server. The Linux

Primary Server is listed as an unmanaged device in ZCC (

Device

Inventoried

For information on how to install the inventory-only agent, see “

Installing on

Linux/UNIX

” in the

ZENworks 10 Configuration Management Discovery,

Deployment, and Retirement Reference

How do I enable debug logging?

Source: ZENworks 10 Configuration Management; Asset Inventory.

Action: To enable the logs, see TID 3418069 in the

Novell Support Knowledgebase

(http://support.novell.com/search/kb_index.jsp)

Содержание ZENworks 10 Configuration Management Asset Inventory

















































































































































Результаты поиска

Содержание ZENworks 10 Configuration Management Asset Inventory

Отзывы:

Novell ZENworks 10 Configuration Management Asset Inventory, Справочное руководство, Страница: 140 / 144

Результаты поиска

Содержание ZENworks 10 Configuration Management Asset Inventory

Отзывы: