Novell ZENworks 10 Configuration Management Asset Inventory, Справочное руководство, Страница: 135 / 144

Managing Product Data 135
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Categories and subcategories are managed through the Product Categories panel ( Configuration >
Asset Inventory ). This panel displays the following information:
Š Category Type: The product category, such as CPU or CD-ROM. These are predefined.
Š
Category Name: The name of the product category.
Š Source: Specifies whether the category name is a default value ( Novell ) or a user-defined value
( Local ). Only Local categories can be edited or deleted.
Figure 10-2
Product Categories Panel
The following sections provide more information about managing product categories and
subcategories:
Š
Section 10.3.1, “Creating a New Product Category,” on page 135
Š Section 10.3.2, “Renaming a Product Category,” on page 136
Š
Section 10.3.3, “Deleting a Product Category,” on page 136
Š Section 10.3.4, “Creating a New Product Subcategory,” on page 136
Š
Section 10.3.5, “Renaming a Product Subcategory,” on page 136
Š Section 10.3.6, “Deleting a Product Subcategory,” on page 137
10.3.1 Creating a New Product Category
1 In ZENworks Control Center, click Configuration , then click the Asset Inventory tab.
2 In the Product Categories panel, click New .
3 Select a category type in the Category Type field.
4 Specify a name in the Category Name field.
5 Click OK .
The new category is added to the category list with the source shown as Local . You can further
define this category by assigning a subcategory. For more information, see Section 10.3.4,
“Creating a New Product Subcategory,” on page 136 .