9
排解故障
TROUBLESHOOTING
Serial
no.
序號
Faults
故障
Causes
原因
Solutions
解決方案
1
指示燈尚未亮起
The indicator light does not
switch on
插頭是否已插緊
Is the power cord well plugged?
檢 查 電 源 開 關 、 保 險 絲 插
頭、插座和電源處於良好的
工 作 狀 態 , 並 正 確 連 接 插
頭。
Check that the power
switch, fuse plugs and
sockets and power supply
lead are all in good working
condition, and that the plug
is connected properly.
指示燈損毀
(
煮飯功能正常
)
Indicators damaged but still can
cook
請聯絡指定的維修中心維修
Contact to the
maintenance department
for repair
電熱盤損毀
(
電飯煲不能運作
)
Hot plate damaged and no heat
水已經燒乾，產品正處於防乾燒保護
狀態
The water has dried up and the
product is in the overheating
prevention mode.
請等待
PTC
發熱元件冷卻
後，再加水運作
Please wait for the PTC
heating element cool down,
then add water to operate
again.
2
食物不夠熟或烹飪時間過久
Cooked rice is rare or cooking
for too long
內部機件出現問題
The internal components are broken
請聯絡指定的維修中心維修
Contact to the
maintenance department
for repair
內鍋變形
Container is misshapen
請聯絡指定的維修中心更換
內膽
Contact the maintenance
department to replace the
pot
發熱盤可能被
“
水垢
”
堵塞
The heating tray may be clogged
with “scale”
請用沙紙清潔發熱盤
Clean the heating tray with
a sand paper.
3
米飯過熟
Over cooked
水份過多
Water level too high
請參照
P.7
參考表
Please refer to the table on
P.7
內部機件出現問題
The internal components are broken
請聯絡指定的維修中心維修
Contact to the
maintenance department
for repair
4
煮飯長時間未能達到沸點
Rice cooking do not arrive at
boiling point for a long time.
電路板損壞
Main circuit board failure.
請聯絡指定的維修中心維修
Contact the maintenance
department for repair
