Chapter 3 SMART7 Operation
SMART7 Installation and Operation User Manual v6
55
For details about using NovAtel Connect, refer to the Help file available within NovAtel Connect.
NovAtel Connect version 2.0 or greater is required for OEM7 receivers. Download the latest
NovAtel Connect software and documentation from
www.novatel.com/novatel-connect
To open the Logging Control window:
1. Open NovAtel Connect.
2. Establish a connection to the receiver.
3. Click the
button to open the Logging Control Window.
3.12.1 Selecting the Logs to Collect
The logs configured to be collected are shown in the bottom portion of the screen.
To add logs:
1. Click the
+ Add Log
button. The
Add Logs
dialog box opens.
2. Click the check box for each log you want to add.
The logs are listed alphabetically and are organized on tabs by category.
If the log name is known, enter the log name, or a portion of the log name, in the search box. The search
starts as soon as text is entered. The search works within the selected tab, so if the log is not found, click on
the other tabs to search those tabs.
3. After the logs required are selected, click the
Add
button.
The selected logs are added to the Logging Control Window with default logging parameters.
To remove a log from the set of logs to be collected:
1. Click the red
X
button beside the log.
3.12.2 Modify the Logging Parameters
Each log on the Logging Control Window has three parameters that affect how the log is collected.
