Novatel SMART6, Руководство пользователя, Страница: 74 / 78

SMART6 User Manual Rev 3 74
Table 13: Position or Velocity Type
Table 14: Solution Status
Type (binary) Type (ASCII) Description
0 NONE No solution
1 FIXEDPOS Position has been fixed by the FIX POSITION command
2 FIXEDHEIGHT Position has been fixed by the FIX HEIGHT/AUTO command
8 DOPPLER_VELOCITY Velocity computed using instantaneous Doppler
16 SINGLE Single point position
17 PSRDIFF Pseudorange differential solution
18 WAAS Solution calculated using corrections from an SBAS
19 PROPAGATED Propagated by a Kalman filter without new observations
32 L1_FLOAT Floating L1 ambiguity solution
33 IONOFREE_FLOAT Floating ionospheric-free ambiguity solution
34 NARROW_FLOAT Floating narrow-lane ambiguity solution
48 L1_INT Integer L1 ambiguity solution
49 WIDE_INT Integer wide-lane ambiguity solution
50 NARROW_INT Integer narrow-lane ambiguity solution
Solution Status
Description
Binary ASCII
0 SOL_COMPUTED Solution computed
1 INSUFFICIENT_OBS Insufficient observations
2 NO_CONVERGENCE No convergence
3 SINGULARITY Singularity at parameters matrix
4 COV_TRACE Covariance trace exceeds maximum (trace > 1000 m)
5 TEST_DIST Test distance exceeded (maximum of 3 rejections if distance > 10 km)
6 COLD_START Not yet converged from cold start
7 V_H_LIMIT Height or velocity limits exceeded (in accordance with export licensing
restrictions)
8 VARIANCE Variance exceeds limits
9 RESIDUALS Residuals are too large
10 DELTA_POS Delta position is too large
11 NEGATIVE_VAR Negative variance
12 Reserved
13 INTEGRITY_WARNING Large residuals make position unreliable
14-17 Reserved for SPAN-capable receivers
18 PENDING When a FIX POSITION command is entered, the receiver computes its
own position and determines if the fixed position is valid
a
19 INVALID_FIX The fixed position, entered using the FIX POSITION command, is not
valid