Data Logs
Chapter 6
EuroPak-15a Receiver User Manual Rev 5
99
Recommended Input:
LOG TRACKSTATA ONTIME 1
Example Output:
#TRACKSTATA,COM1,0,64.5,FINE,1048,507426.700,00000028,228E,0;
SOL_COMPUTED,SINGLE,0.0,24,
5,0,8105C04,25052294.167,3388.063,40.188,63.560,7.209,GOOD, 1.000,
...
2,0,1305C2B,21433408.821,1310.921,43.913,514.040,0.000,OBSL2, 1.000,
...
26,0,1305D6B,24444419.776,2365.217,31.530,1506.520,0.000,OBSL2,
1.000
*cd40e0aa
Table 49: Reject Code Values
ASCII
Binary
Description
GOOD
0
Observations are good
BADHEALTH
1
Bad satellite health is indicated by ephemeris data
OLDEPHEMERIS
2
Old ephemeris due to date not being updated during the last 3 hours
ECCENTRICANOMALY
3
Eccentric anomaly error during computation of the satellite’s position
TRUEANOMALY
4
True anomaly error during computation of the satellite’s position
SATCOORDINATEERROR
5
Satellite coordinate error during computation of the satellite’s position
ELEVATIONERROR
6
Elevation error due to the satellite being below the cut-off angle
MISCLOSURE
7
Misclosure too large due to excessive gap between estimated and actual
positions
NOEPHEMERIS
9
Ephemeris data for this satellite has not yet been received
INVALIDIODE
10
Invalid IODE (Issue Of Data Ephemeris) due to mismatch between
differential stations
LOWPOWER
12
Low power meaning that the satellite is rejected due to low carrier/noise
ratio
NOIONOCORR
16
No compatible ionospheric correction is available for this particular
satellite
BAD_INTEGRITY
17
Bad integrity indicating a large variation between the measured range to
the satellite and the theoretical range computed from the ephemeris
OBSL5
18
Tracking a GPS or SBAS L5 signal that is not used in a position solution
GALL1
19
Tracking a Galileo L1 signal
GALE5a
20
Tracking a Galileo E5a signal
OBSL1
23
Tracking a GPS or SBAS L1 signal that is not used in a position solution
NA
99
No observation (a reject code is not applicable)