Using Commands and Logs
Chapter 4
EuroPak-15a Receiver User Manual Rev 5
33
Table 4: Response Messages
String
ID
Meaning
OK
1
Command was received correctly
NOT ENOUGH RESOURCES IN
SYSTEM
3
The request has exceeded a limit (for example, the
maximum number of logs are being generated)
DATA PACKET DOESN’T VERIFY
4
Data packet is not verified
COMMAND FAILED ON RECEIVER
5
Command did not succeed in accomplishing requested task
INVALID MESSAGE ID
6
The input message ID is not valid
INVALID MESSAGE FIELD =
X
7
Field
x
of the input message is not correct
MESSAGE MISSING FIELD
9
A field is missing from the input message
ARRAY SIZE FOR FIELD
X
EXCEEDS
MAX
10
Field
x
contains more array elements than allowed
PARAMETER
X
IS OUT OF RANGE
11
Field
x
of the input message is outside the acceptable limits
TRIGGER
X
NOT VALID FOR THIS LOG
14
Input trigger
x
is not valid for this type of log
NO VALID AUTH CODE FOR THAT
MODEL
19
The model attached to the authcode is not valid
CHANNEL IS INVALID
20
The channel number is not correct
REQUESTED RATE IS INVALID
21
The requested rate is invalid
CHANNELS LOCKED DUE TO ERROR
23
Channels are locked due to error
INJECTED TIME INVALID
24
Injected time is invalid
COM PORT NOT SUPPORTED
25
The COM port is not supported
MESSAGE IS INCORRECT
26
The message is invalid
INVALID PRN
27
The PRN is invalid
MESSAGE TIMED OUT
31
The message has timed out
UNKNOWN COM PORT REQUESTED
33
Unknown COM port requested
HEX STRING NOT FORMATTED
CORRECTLY
34
Hex string not formatted correctly
INVALID BAUD RATE
35
The baud rate is invalid
MESSAGE IS INVALID FOR THIS
MODEL
36
This message is invalid for this model of receiver
COMMAND ONLY VALID IF IN NVM
FAIL MODE
40
Command is only valid if NVM is in fail mode
INVALID OFFSET
41
The offset is invalid
MAX NUMBER OF USER MESSAGES
REACHED
78
The maximum number of user messages allowed has been
reached
GPS PRECISE TIME IS ALREADY
KNOWN
84
GPS precise time is already known