NWB & NWB-HC IM28 OCT 2014
Page 31
Instruction Manual NWB & NWB-HC IM 28 OCT 2014
15.0 WARRANTY
– NOVATEC, INC. - Effective Date 9 JULY 2014
NOVATEC, INC. offers COMPREHENSIVE PRODUCT WARRANTIES on all of our plastics auxiliary
equipment. We warrant each NOVATEC manufactured product to be free from defects in materials and
workmanship, under normal use and service for the periods listed under
“Warranty Periods”.
The
obligation of NOVATEC, under this warranty, is limited to repairing or furnishing, without charge, a similar
part to replace any part which fails under normal use due to a material or workmanship defect, within its
respective warranty period. It is the purchaser’s responsibility to provide NOVATEC with immediate written
notice of any such suspected defect. Warranted replacement parts are billed and shipped freight pre-paid.
The purchaser must return the suspect defective part, freight prepaid and with identifying documentation to
receive full credit for the part returned. NOVATEC shall not be held liable for damages or delay caused by
defects. No allowance will be made for repairs or alterations without the written consent or approval of
NOVATEC.
The provisions in equipment specifications are descriptive, unless expressly stated as warranties. The
liability of NOVATEC to the purchaser, except as to title, arising out of the supplying of the said equipment,
or its use, whether based upon warranty, contract or negligence, shall not in any case exceed the cost of
correcting defects in the equipment as herein provided. All such liability shall terminate upon the expiration
of said warranty periods. NOVATEC shall not in any event be held liable for any special, indirect or
consequential damages. Commodities not manufactured by NOVATEC are warranted and guaranteed to
NOVATEC by the original manufacturer and then only to the extent that NOVATEC is able to enforce such
warranty or guaranty. NOVATEC, Inc. has not authorized anyone to make any warranty or representation
other than the warranty contained here. Non-payment of invoice beyond 90 days will invalidate the
warranty. A renewed warranty can be purchased directly from NOVATEC.
Please note that we always strive to satisfy our customers in whatever manner is deemed most expedient
to overcome any issues in connection with our equipment.
Warranty Period:
Note: All warranty periods commence with the shipment of the equipment to the customer.
NWB
Series NovaWheel™ = 2 Years
Exclusions:
Routine maintenance/replacement parts are excluded from the warranty. These include, but are not limited
to: hoses, desiccant, filters, filter elements, wiper seals, gaskets, dew point sensors, infrared lamps,
motors, internal solenoids, fuses and motor brushes. Use with abrasive materials will void the warranty of
any standard product. Wear resistant options may be available to extend usable service life with abrasive
materials. NOVATEC reserves the right to limit the warranty if the customer installs replacement parts that
do not meet the specifications of the original parts supplied by NOVATEC.
*Specific Exclusions:
1. NovaDrier warranty is void if coalescing filters are not replaced on a 6-month or yearly basis (per
instruction manual) and/or membrane has been exposed to ozone.
2.Touch screen controls on NovaWheel dryers have a 2-year warranty. All other controls have a 1-year
warranty
3. NovaVac Dryer -The ability of the canisters to hold vacuum will be compromised if the vacuum seal
edge is damaged from mishandling. We do not warranty canisters damaged from improper handling. We
do, however, warranty the seals.
4
. LOAD CELLS on our WSB’s are covered by NOVATEC standard warranty as long as they have not
been damaged from improper handling.
5. Velocity Control Valve warranty is voided if unit is placed in direct material flow.
This warranty shall not apply to equipment:
1. Repaired or altered without written approval of NOVATEC unless such repair or alteration was, in our
judgment, not responsible for the failure
2. Which has been subject to misuse, negligence, accident or incorrect wiring by others
3. Warranty is void if processing rates exceed manufacturer-recommended levels or if damage is caused
by ineffective power isolation and/or power spikes/sags or incorrect installation.
NOTE: All conditions and content of this warranty are subject to changes without notice.
