NWB-DC IM 3 JAN 2014
© 2014 Novatec, Inc. All Rights Reserved
Page 22
NWB-DC IM 3 JAN 2014
Press Machine Mount Receiver icon. Machine Loading screen will appear.
Set values as required, then press back arrow to
Return to the Quick Op screen.
Press the RESIN NAME button on the hopper icon to
access the resin menu.
Choose one of the pre-set resins or press the resin name and/or drying temperature to enter
your own values in the resin memory. Press the BACK button to return to Quick Op screen.
.
OR
…enter the desired PROCESS SETPOINT on the Quick Op Screen.
Press Green “ON” switch to
start the Process Heater.
Press the MENU button to access additional screens. (See Manual)
When material is ready to be processed , press the
Machine Mount Receiver icon and press to turn the
Machine Mount Receiver ON.
Note that Process Heater can be turned OFF or ON
using the button at the bottom of the Quick Op screen.
v
v
v
v
v
v
6
7
8
v
8
9
9
v
9
v
10
0
v
v
10
0
11
0
v
11
0
NOTE:
Values in Hopper
and Machine
Receiver screens
should be adjusted
To optimal values
after processing
begins. Blowback
must be specified
when order placed.