NWB-DC IM 3 JAN 2014
© 2014 Novatec, Inc. All Rights Reserved
Page 18
NWB-DC IM 3 JAN 2014
15.0 NovaTouch
™ CONTROL
15.1 System Conventions:
All information and data displays will appear two dimensional in configuration and flat. All data entry
points or operational features will appear three dimensional in configuration and raised or depressed in
appearance depending on their operational position.
Proceed as follows:
1. Touch the relevant IO field on the screen.
The numerical screen keyboard opens and displays the current value.
2. Set the value.
You can only operate keys which are visualized in 3D format. The type of value to be entered
determines whether a key is enabled or disabled.
The following options for entering values are available:
The current value is deleted when you enter the first character. Enter the value again.
Use the
and
keys to move the cursor within the current value. You can now edit the
characters of the current value or add characters.
Use the
key to delete the character to the left of the cursor.
Use the
key to change the sign of the value.
Select
to view the info text of the IO field.
Select
to confirm your entries or cancel them with
. Both actions close the screen
keyboard.
Numerical Entries
: When you touch an IO
field on the HMI device touch screen that
requires only a numerical entry (Password,
Temperature, number of seconds etc.) the
following keyboard will appear.
Alpha/Numeric Entries:
When you are prompted to enter alphabetical
and numerical data (Resin Names/Numbers)
this screen will appear: