31 of 33
xDR-DSP
– Diver Intercom Manual
Build 39 Date: 30-08-2021
Depth display hardware
The Diver depth can be displayed using the Novasub depth sensors with topside hardware. You will need the following
integrated or separate equipment.
DDG
The DDG is the Novasub Digital Depth Gauge which is used with the pneumo hose or external pressure sensor UDS-3 to
measure the diver depth. The DDG requires to be connected with the 2 wire NovaBus connection the xDR radio.
Devices needed:
•
NSDDG2V1.2
•
UDS-3-xMSW
•
NovaBus connection
PCBDDSI
The PCBDDSI is a depth sensor data serial interface which is built in a xDR case or other Novasub surface control
system. The depth sensor UDS-3 is directly wired to this PCB.
Device integrated in xDR or surface control system:
•
PCBDDSI
•
UDS-3-xMSW
