22 of 33
xDR-DSP
– Diver Intercom Manual
Build 39 Date: 30-08-2021
Outputs
These pages are for the Input settings. The last page returns to Main settings
- MAIN SETTINGS
Ouputs
>
----Output----
Rec1 Can hear
Rec1 Can hear
D1 D2 T1 H1 H2 AUX
----Output----
Rec1 Volume
----Output----
To main settings
Rec1 Volume
XX
{Value 0-100}
----Output----
Rec2 Can hear
----Output----
Rec2 Volume
----Output----
Aux1 Can hear
----Output----
Aux1 Volume
----Output----
Aux2 Can hear
----Output----
Aux2 Volume
Aux1 Can hear
D1 D2 T1 H1 H2 AUX
Aux1 Volume
XX
{Value 0-100}
4CH xDR will also show Rec3/4 & Aux3/4
4CH xDR will also show D3,D4 &T2
4CH xDR will also show D3,D4 &T2
Can Hear
----Output----
Rec1 Can hear
Rec1 Can hear
D1 D2 T1 H1 H2 AUX
4CH xDR will also show D3,D4 &T2
For each output you can select which audio source the output will hear:
See Chapter
for a full explanation of the can hear function.
Volume
----Output----
Rec1 Volume
Rec1 Volume
XX
{Value 0-100}
For each output you can select the volume that it will output. This ranges from 0-100 with
100 being the loudest.
