13 of 33
xDR-DSP
– Diver Intercom Manual
Build 39 Date: 30-08-2021
Main Menu
The Main Menu has 8 different pages where you scroll through using the rotary switch.
Press at a Main Menu display page and press once on rotary switch to enter this menu item
Rotate the rotary switch back and forwards to scroll through the menu and press is once at a display to select it. The last
page is to Exit this menu.
Vol. Tender
The Vol. Tender is the internal speaker and connected headset volume level. The level is adjusted
from 1-100% of the full output power. This Volume control is on top of the Diver to Tender Volume
control of each diver.
Vol. Ext. Speaker
-- MAIN MENU ---
Vol. Ext. Speaker
Vol. Ext. Speaker
XX
{Value 0-100}
Press to select
The Vol. Ext. Speaker is the external speaker volume level. The level is adjusted from 1-100% of
the full output power. This Volume control is on top of the Diver, Tender and other audio gains
selected. The external speaker has an independent amplifier of 15 watts.
Comms Mode
The Comms Mode is used to select when you want to operate half
duplex or full duplex and in hybrid mode with wireless headsets.
•
All FD: All Full Duplex
In this mode you speak with the divers in a full duplex mode,
there is no need of using the PTT buttons. You can hear the
divers and the divers can hear you.
•
All HD: All half duplex
You will always hear the divers, even when you speak to
him (only with 4 wire comms) but every Tender needs to
press a PTT button to speak to the divers.
•
Tender HD/wHS FD: Tender (panel/wired headset) half
duplex & Wireless headset full duplex
The Tender needs to press the PTT to talk with the divers
and the wireless headset speaks to the divers without the
use of PTT button on the headset.
Type of comms D1
-- MAIN MENU ---
Type comms D1
Type comms D1
Novasub
Type comms D1
Kirby
Type comms D1
Interspiro
Type comms D1
OTS
Type comms D1
Custom
A quick access to select which type of
communication is used on the helmet or
FFM. Each system has different gain
settings for optimum use. We made a pre-
selected gain matching each brand of
communication unit.
Each predefined gain setting can be
adjusted in the menu at the diver settings
and will be stored in the memory. When you
use the reset settings it will jump back to the
factory settings.
Predefined settings are based on 4 wire
comms.
Novasub
Novasub brand comms set for Kirby helmets
Kirby
Kirby Morgan standard comms set for Kirby helmets
Interspiro
Interspiro comms set for Divator FFM
OTS
OTS comms set for FFM
Custom
Custom or other brand of comms set used in helmet or FFM
-- MAIN MENU ---
Vol. Tender
-- MAIN MENU ---
Vol. Ext. Speaker
-- MAIN MENU ---
Comms mode
-- MAIN MENU ---
Main Settings >
-- MAIN MENU ---
Display Setting >
-- MAIN MENU ---
Startup Function
-- MAIN MENU ---
Exit Menu
-- MAIN MENU ---
Type comms D1
-- MAIN MENU ---
Vol. Tender
Vol. Tender
XX
{Value 0-100}
Press to select
-- MAIN MENU ---
Comms mode
Comms mode
All FD
Comms mode
all HD
Comms mode
Tender HD/wHS FD
