8 of 16
SCC-2DR-DSP Manual
Version: 1.0 - Date: 26-11-2020
Basic Controls
Below you find some of the basic controls that are on almost all panels.
Power button
ON
Press and hold for 1 second to start up the system. This will start up
both the DVR3 and the xDR
OFF
Press and hold for 1 second to shut down the system. This will shut
both the DVR3 and the xDR down.
Speaker button
This uses a “Stay put push button”, this means that once you press it, it will
remain in that position.
Speaker ON
Button Pushed in
Speaker OFF Button out
