MX40 Pro LED Display Controller User Manual
www.novastar.tech
20
Figure 7-3 Mapping
Enable the Mapping function by toggling on this switch
.
7.4
Control Display Status
Set the display loaded by the controller to a black screen or frozen status.
On the main menu screen, choose
Display Control
.
Figure 7-4 Display control
Select a display status as required.
Normal: Display the normal output screen.
Freeze: Make the output screen always display the current frame. The input source is played normally.
Blackout: Make the output screen go black. The input source is played normally.
7.5
Diagnostics
Perform device diagnostics, then view and export the result.
On the main menu screen, choose
System Settings
>
Diagnostics
.
Figure 7-5 Diagnostics
Select
Yes
in the displayed dialog box.
After successful diagnostics, do any of the following as required.
View the diagnostic result
a.
Select
View Results
to enter the report page.
b.
View the information of MCU, FPGA, motherboard voltage, temperature inside the device, and more.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
