MX40 Pro LED Display Controller User Manual
www.novastar.tech
12
Figure 6-4 EDID parameters
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
After the settings are done, click
Apply
.
6.1.3
Adjust Color
Set the input source override parameter and adjust the color. The override parameter will be used in the calculation of
color adjustment. If the value of this parameter is not set manually, the value that comes with the input source can be
used.
On the main menu screen, choose
Input Settings
>
input source
>
EDID
. The
input source
is HDMI1, HDMI2, DP or
SDI.
Figure 6-5 Infoframe override
Set the following parameters as required.
Figure 6-6 Override parameters
Select
From Input
and the device will read the attribute value that comes with the input source.
Press the
BACK
button to go back to the upper-level menu.
Select
Color Adjustment
.
Set the related parameters.
Black level is used to adjust the contrast of the dark areas of the image.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
