Novanta f201, Руководство пользователя

Страница: 13 / 105

PACKAGING GUIDELINES PAGE | 13
Unpacking the laser
To unbox the laser, refer to the figure below and perform the following steps:
Figure 2-1 Unpacking the laser.
1. Carefully cut the shipping strap wrapped around the container. This strap secures the upper lid to
the shipping crate.
2. Remove the upper lid and set it aside.
3. Remove the four polyurethane foam blocks that center the inner box within the outer crate.
4. Open the four flaps of the inner box.
5. Remove the three foam blocks cradling the top of the laser. To remove the center block, first slide
it forward several inches and then lift.
6. The laser is shipped with three lifting handles bolted to the mounting feet. Use these handle grips
to hoist or lift the laser from its shipping container. To prevent injury to personnel or damage to
the laser, always use a minimum of three people to handle the laser.
Important Note: All f201 lasers are water-cooled because of the integrated RF section’s heat
removal requirements. f201 lasers cannot be fan cooled. Damage to your laser will void your
warranty.
7. After removing the laser, pull out all the accessory items packaged with the laser