Novanta 32-1 Laser, Руководство пользователя

Страница: 49 / 58

STORAGE/SHIPPING PAGE | 49
Storage/shipping
Refer to Packaging instructions in the Technical Reference chapter and/or appropriate quick start guide
for detailed instructions on properly packaging the laser for shipment.
If you no longer have the original shipping box and inserts, contact NOVANTA® Customer Service about
purchasing replacement packaging.
Important Note: Failure to properly package the laser using NOVANTA-supplied shipping boxes
and foam/cardboard inserts as shown in the Packaging instructions may void the warranty.
Customers may incur additional repair charges for shipping damage caused by improper packaging.
Debris or contaminants on the laser’s output coupler or external beam delivery components may affect
laser processing and lead to damage or failure of the optics and/or the laser. Carefully follow the steps
below to inspect and clean the optical components in the beam path. Before beginning the cleaning
process, read this entire section thoroughly to ensure that all cleaning materials are available and that each
step is completely understood.
Important Note: Exercise great care when handling infrared optics; they are much more fragile
than common glass materials. Optical surfaces and coatings are easily damaged by rough handling
and improper cleaning methods.
Cleaning guidelines
•
Before using any cleaning agents, read Safety Data Sheets (SDS) and observe all necessary safety
precautions.
• Wear latex gloves or finger cots (powder-free) to prevent contamination of optical surfaces by dirt
and skin oils.
• Never handle optics with tools; always use gloved hands or fingers.
•
Hold optics by the outer edge; never touch the coated surface.
• Always place optics on a tissue or suitable equivalent material for protection; never place optics
on hard or rough surfaces.
Caution: Possible Equipment Damage
Even small amounts of contamination on optics in the beam path can absorb enough energy to
damage the optic.
Inspect beam delivery optics periodically for signs of contaminants and carefully clean as required.